|Minimum Order Quantity||1 Unit|
|Wall Type||Double Wall - 5 Ply|
In this machine, the single face web, after an application mechanism had applied adhesive to the flute tips, was brought into contact with the double face liner at the entry of the machine, and the combined webs then drawn over a series of heated plates by an arrangemrnt of top and bottom heavy woven cotton belts.
Immediately following the hot plate section was a tractor, cooling temperering section, where the combined web was supported by a bottom belt carried on a bed of idlers. Both top and bottom belts were powered by a pair of driven puller Roll at the rear of the machine.The top belt, ballasted by a series of idlers, extended the full length of the machine. Over the heating section this arrangenment kept the corrugated web in intimate contact with the heated plates, providing for good heat transfer and holding the single face web and the bottom liner in firm engagement. this firm engagement, vital to good bond, was maintained also in the tractor, cooling-tampering section, which conveyed the web without slippage and crushing to the cut-off mechanism.
Production speed upto 50 mts. 60 mts & 100 mts per min.